How To Choose The Right Fire Sprinkler System Option?

How To Choose The Right Fire Sprinkler System Option?

A fire sprinkler system can help you minimize the damage caused to your property due to an outbreak of fire and save your life. It is a critical step in ensuring the safety of the people you live and work with. 

To choose the right fire sprinkler, it is vital to ask the right questions. You must know the system’s response speed, the volume of water, the regulations and building codes, and what fits the building design the best. To simply your understanding, here a few available options you can choose from. Also, if you are in some doubt, go for a fire sprinkler system inspection to know the current system’s efficiency and if there is any need for replacement. 

What are automatic sprinkler systems?

How To Choose The Right Fire Sprinkler System Option?

Automatic sprinkler systems, as the name suggests, get triggered automatically on the outbreak fire. They come in combination with different sensors that detect the different factors that suggest fire. The modern building codes manage you to install an automatic sprinkler system as per the building design; they would also suggest the right number of sprinklers and places they need to install. Once the system is triggered, they sprinkle water or pressurized gases to control the fire. 

Types of sprinklers

Depending on the environmental factors, the possibility of hard and protection preference of the owner, the right sprinkler can be chosen. 

  1. Wet Pipe 

Wet pipe sprinkler systems sprinkler water and are best to use in climate-controlled buildings. They are not permitted in the building where the temperature cannot be maintained above 40F. As a building owner, it would become your responsibility to maintain the temperature of the environment and avoid water freezing. The system needs regular fire sprinkler system inspection and is prone to physical damage. 

  1. Dry Pipe 

Instead of water, the sprinklers shower compressed air or nitrogen. They are good to use in the building with temperatures below 40F. The gases are released when the system detects a change in the environment; once the pressure gets dropped, the system releases water to system pipes. They are good to use in industrial areas, as they are not susceptible to physical damage but to internal corrosion.

What are automatic sprinkler systems?
  1. Antifreeze 

Antifreeze popes are water-filled sprinklers, but they don’t require you to maintain the temperature of the building. But it is important that the antifreeze solution is mixed well, or else they might be flammable.  

  1. Deluge 

Deluge is one of the best solutions for the sites where fire hazard is of high possibility. In these areas, the reaction time of sprinklers, even if that is in minutes, is considered slow. In that case, a deluge would allow you to rapidly activate the fire inspection system. You can manually activate a deluge or using a release system.  You can install them in hot and cold environments. But they have high hydraulic demand and thus are best for robust infrastructures. 

In the end, no matter what fire sprinkler system you choose, it is important that you go for regular fire sprinkler system inspections to maintain them and save yourself from life and property losses.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *